SVF Technical Services  

Introduction

BACKGROUND
SVF Technical Services Co., Ltd. was founded by Srisak Visitpong and Mike Feaver in December 2003. SVF is part of SVJ Group of company who provide service and supply to Thailand and Asia Oilfield. Mike has over 40 years experience in design, manufacturing, commissioning, modification of oilfield production facility. He started to work for Unocal Thailand from 1977 till 2003 in setting up workshop, training etc. for Unocal Thailand. He worked closely to Construction, Maintenance, Wellservice and Drilling Department.

Business Activities
  • Manpower Supply
  • Equipments Rental
  • Material Supply
  • Machine Shop
  • Fabrication
  • Consultant/Trouble Shooting
  • Shop Rental

Facilities

Located in Songkhla, Thailand 1 kilometer from Songkhla Deep Sea Port and 1 kilometer from PTTEP's new jetty with 11,000 sq. m for total land area.

Concrete Area 24 m x 40 m total 940 sq.m
Covered Area 20 m x 30 m total 600 sq.m consisting of
  • Office, Electrical Shop and Store Room 120 sq.m
  • Machine Shop 12 m x 20 m total 240 sq.m.
  • Fabrication Shop 12 m x 20 m total 240 sq.m. with partial steel floor
Portable Office 40 Ft Cabin with 2 Office and Aircondition
Portable Office 20 Ft Cabin for Customer Representative or Conference Room

Company's own equipment

Handling Equipment & Utility

  • 1 Unit 10 & 5 Ton Overhead Crane 9 m wide, 31.6 m long and 5.6 m high
  • 1 Unit 3.5 Ton Deisel Forklift
  • 1 Unit Portable Crane
  • 1 Unit Portable Forklift
  • 1 Unit 250KVA 380/460 V Standby Diesel Generator 380/220 V Electricity Supply

Machine Shop Equipment
  • 2 ea 14 ft Center lathe plus Taper Attachment
  • 1 ea 10 ft Center Lathe
  • 2 ea 5 ft Center Lathe
  • 2 ea Small Lathe
  • 1 ea Sharper Machine 24”
  • 1 ea 3 Axis Milling Machine
  • 2 ea Axis Milling Machine
  • 1 ea 2 Radial Drill
  • 3 ea Drill Press
  • 1 ea Hydraulic Press 10 Ton
  • 2 ea Power Hacksaw
  • 1 ea Small Shear 1.5 mm
  • 3 ea Bench Grinder
  • 2 ea Pedestal Grinder
  • 1 ea OD Grinder
  • 1 ea Tool Grinder
  • 1 ea Double Axis Sander Machine
  • 1 ea Band Saw
  • 1 ea Mechanical, Electrical Hand Tool and Instrument Tool

Fabrication Shop Equipment
  • 1 ea 500 Amp Daichi Welding Machine AC/DC
  • 2 ea 300 Amp Daichi Welding Machine AC/DC
  • 1 ea 300 Amp Makita Welding Machine AC
  • 1 ea 300 Amp Wim Welding Tig Set AC/DC
  • 1 ea 300 Amp Portable Gasoline Motor Welder/Generator
  • 1 ea 1-40 MM Air Plasma Cutting
  • 4 sets Gas Cutting Torch
  • 2 ea 7” Grinder Machine
  • 5 ea 4” Grinder Machine
  • 1 ea 100 kgs. Electrode Oven
  • 3 ea 5 kgs. Portable Electrode Oven
  • 2 ea Portable Electric Drill machine ?”
  • 1 ea Portable Electric Drill Machine ?”
  • 1 ea Hydraulic Press 60 Ton
  • 1 ea Power Hacksaw
  • 1 ea 14” Abrasive Cut Off Saw
  • 1 ea Pressure Test Equipment 10,000 PSI and Recorder
  • 1 ea 300 BBLS 3 section Tank for Wet Test

Major Track Records

SVF was established in late December and spend most of the time to set up the shop. So it only has the following works.

  • Mobilize survey equipment to M/V Salvaree.
  • Install the winch
  • Repair all electrical equipment
  • Machine special survey kits for
  • Rigid Link Fabrication
However Mike Fever has long experience in business we offer. He had done the following major project for Unocal Thailand.
  • Design and fabricate to change Cryogenic Refrigeration to Gas
  • Design and manufacture machine to cut jacket leg to accommodate the top side
  • Design and manufacture Triangle Band Saw to cut 26” conductor cement to 13 3/8” and 9 5/8” casing
  • More than 100 other projects to modify Central Processing Platform

Contact Information

Bangkok Office
978 Srinakarin Road, Kwang & Khet Suanluang, Bangkok 10250, Thailand
Tel: (662) 728-7628-9
Fax: (662) 320-4475
e-mail: [email protected]

Songkla Office
38/5 Moo 7, Tambol Huakao, Amphur Sighanakorn, SongKhla 90280, Thailand
Tel. (6674) 332890-1
Fax. (6674) 332845
e-mail: [email protected]

^ back to top ^